Disclosure: We are a professional review site that receives compensation from the companies whose products we review. We test each product thoroughly and give high marks to only the very best. We are independently owned and the opinions expressed here are our own..
Back in 2018 I wrote an article on How to Clean Your Sony a6000 APS-C Sensor. After reading over it the other day I decided it was time to update that article. Now that there are more than just a couple of Sony a6xxx models available it time to write up how to articles for each of those models. For the most part the process is similar and may even be same process but to avoid confusion these how-to articles are needed. Today's article is How to Clean Your Sony 6300 APS-C Sensor. This article is a modification to the original article I wrote. If you have a Sony a6000 camera and need to clean it, check my article, How to Clean Your Sony a6000 APS-C Sensor. Have you noticed how easily your Sony a6300 and APS-C camera sensor gets dirty even when you do not change lenses? It doesn’t matter how clean the environment is when you change lenses or even if you never change lenses dust still gets in. There are a few easy ways to to clean your camera. But for those stubborn dust spots that won’t go away you need use a APS-C Sensor Cleaning Kit. After some research, I realized there are a ton of cleaning kits available. Some of them are good while a lot of others are not.No products found.
I found that based on reviews the Alutra Photo Professional Cleaning Kit for DSLR cameras and APS-C Sensor Cameras (check out my review )was the best option for me.How to Clean Your Sony a6300 APS-C Sensor
The APS-C sensor is a very sensitive device in your camera. It can easily be damaged. These tips worked for me. You should consult a certified technician before cleaning your own equipment. I am not liable if you damage your equipment or it doesn’t work for you.
-
- Only use tools that are designed to clean the sensor. Anything other than the designed tools will damage your sensor.
- Do not touch it or use a cleaning cloth to clean the sensor. Using a cleaning cloth can scratch or leaving finger prints on the sensor.
- Do not use your mouth to blow dust off the sensors.
- Only use spray cleaner that this designed to clean the sensor. Do your research, there are several cleaners that say they work but they get bad reviews because they leave residue or haze on the sensors.
The Different Ways on How You Can Clean Your Sony a6300 APS-C Sensor
There a few things you can do to clean your APS-C sensor. They are listed from easiest to hardest.Step 1
The first one is to use the cleaning mode on the camera. This feature is available on the Sony a6300 but on some of the earlier models it is not. To access cleaning mode press Menu > Setup > Cleaning Mode > Enter. Once completed, the camera will ask you to turn off the camera and turn it back on.Step 2
If that doesn’t work grab a rubber air blower. Before opening your camera (turn off the camera), make sure there isn’t dust on the body or around the mount. Once the outside is clean remove your lens (have the camera pointing down). Make sure to blow the mount side of the lens with air blower then install your lens cap. While the camera sensor is still pointing down take the blower and point and squeeze towards the sensor. Give it a couple of good squeezes. Then reinstall the lens and run cleaning mode again. Once completed take some test shots of a white wall or a clear blue sky. Upload your images to your computer and take a look at them. If you still see dust spots, you need to clean the sensor or have it cleaned professionally.What type of Rubber Air Blowers Do I Need?
No products found.
As to the type of rubber air blowers on the market, there are a ton of them and they are not all created equally. The cheaper ones may have dust from the manufacturing process that can make the cleaning process worse. The only brand I recommend is the Giottos Rocket Air Blaster. Most professional photographers use this tool and while working for photography company it was the only blower they wanted us to use.Step 3
No products found.
For those dust spots that just won’t go away you can use a APS-C Sensor cleaning kit. To help see those almost invisible dust spots you might want to get yourself a Sensor Cleaner Loupe. Here are a few options to look at Lenspen Sensor Klear Loupe Cleaning System, VisibleDust Mini Quasar Sensor Loupe 7x Magnifier, VisibleDust Quasar Plus Sensor Loupe 7x Magnifier Improved Focusing System, and Movo LCT7X SLR Sensor Loupe with Dust Illuminating Bright LED’s These loupes are on my list to purchase. You only need one, pick the one that you think will work best for you. Turn off your camera and grab your loupe or pin light. Next find a clean area that that is dust free or at least no floating dust near by. When ready, disconnect your lens and put your lens caps on. Take your loupe and look for the spots. Once you locate the spot, grab your APS-C sensors cleaning kit. You will need the sensor solution and the cleaning swabs. Blow out any dust before starting the cleaning process. Open up the swab from its packaging and spray just a little bit on the sensor swab (both sides). Start at the top corner with the swab. In one slow and light motion sweep to the right. Flip the swab over and go the opposite direction.No products found.
If the swab is slightly smaller than the sensor, grab a second swab and spray it again. Then clean the sides and corners that the first swab missed. If you still have moisture on the sensor, use a new swab repeat the process until the moisture is gone.-
- Do not reuse the swabs. The dirty ones can damage the sensor
- always us the air blower to blow out any loose dust. If you have loose dust and use the swab it will drag the dust across the sensor and damage it.
- Spray the solution on the swab and not the sensors.
About James
Leave a Reply